iPhone SE (2020) is finally official, after months of anticipation. With it, Apple has unveiled the most affordable iPhone model in its current lineup. Called the new iPhone SE or iPhone SE 2nd generation, it was originally rumoured to debut as the iPhone SE 2 and later reported as the iPhone 9. It retains the 4.7-inch size that’s available on the iPhone 8 and previous regular iPhone models — not the Plus ones, of course. Despite being the most affordable model, the new iPhone is powered by the Apple A13 Bionic chip, which is powering the iPhone 11 series. The iPhone SE (2020) also runs iOS 13 out-of-the-box and comes with a Touch ID fingerprint sensor.
iPhone SE (2020) price in India, availability details
The iPhone SE (2020) price in India starts at Rs. 42,500 for the 64GB storage variant, going up to Rs. Rs. 47,800 for 128GB storage variant, and Rs. 58,300 for the 256GB storage variant. Unfortunately, India availability has not been revealed.
The US pricing of the new iPhone SE starts at $399 (roughly Rs. 30,600) for the 64GB model, going up to $499 (roughly Rs. 38,200) for 128GB model, and $549 (roughly Rs. 45,000) for the 256GB model. Moreover, the iPhone SE 2020 comes in Black, White, and (Product) RED colour options. Pre-orders begin from 5pm PDT on Friday, April 17, and it will go on sale from Friday, April 24 in the US.
iPhone SE 2020 specifications, features
Apple has provided the 4.7-inch Retina HD IPS LCD display on the iPhone SE (2020) that has 750×1334 pixels resolution and True Tone tech to adjust white balance. It offers a peak brightness of 625 nits. There is support for Dolby Vision and HDR10. The display panel features Haptic Touch support, seen in newer iPhone models.
Under the hood, there is the A13 Bionic chip that is a part of the iPhone 11, iPhone 11 Pro, and the iPhone 11 Pro Max. The new iPhone also has a single 12-megapixel camera sensor (f/1.8 aperture + OIS) at the back along with a LED True Tone flash with Slow Sync. It offers 4K video recording at up to 60fps, and Smart HDR for photos. There is a sapphire crystal lens cover protecting the rear camera.
Despite a single rear camera, the iPhone SE (2020) offers a Portrait mode, using computational photography enabled by the Neural Engine on the Apple A13 Bionic SoC. For selfies and video chat, there is an 7-megapixel camera at the front, with an f/2.2 aperture.
Connectivity options on the iPhone SE (2020) include 4G VoLTE, Wi-Fi 802.11ax, Wi-Fi calling, NFC, Bluetooth v5.0, GPS/ A-GPS, and a Lightning port. There is no 3.5mm headphone jack. The new iPhone also has the Touch ID button — instead of the Face ID support that requires a special array of sensors. It is protected by a sapphire crystal.
Design-wise, the iPhone SE (2020) looks quite similar to the iPhone 8 that was launched as the successor to the iPhone 7 in September 2017. Built using aerospace grade aluminium and durable glass, it measures 138.4×67.3×7.3mm and weighs 148 grams. It also features an IP67 rating for dust and water resistance, meaning it can survive immersion in up to 1 metre of water for up to 30 minutes. However, liquid damage is not covered under warranty, so you should be very careful regardless.
As is usual with Apple, the company has not detailed the size of the battery or the the amount of RAM on the iPhone SE (2020). It is said to last about as long as the iPhone 8, with up to 13 hours of video playback time, and 40 hours of audio playback time. However, it does support fast charging, charging up to 50 percent in 30 minutes with an 18W charger – not bundled. Wireless charging is also supported, using the Qi wireless charging standard. Sensors on board include an accelerometer, ambient light sensor, barometer, three-axis gyroscope, and a proximity sensor.